Pierce Nut Press Fitting for Automotive Application

Proyectos de referencia

Descripción general de las aplicaciones Clinchado eClinching Unión con elementos Inserción de elementos de función Ensamblado Punzonado Acuñado Prensado Proyectos de referencia

Formulario de contacto

Back to the project list

Pierce Nut Press Fitting for Automotive Application

Zoom
TOX®-System for press-fitting of pierce nuts
Zoom
Setting head for press-fitting of pierce nuts
Zoom
Cutomper part with pressed-in pierce nuts
Zoom
Press with bottom-mounted drive
Zoom
Element feeding with movable slide
Zoom
Fully automated system for setting pierce nuts
Zoom
System control and process monitoring

Information on the project

In this project, an automotive customer used the TOX®-System for press fitting pierce nuts into a shock absorber mounting. The challenge for this project was the special geometry of the component with partly inaccessible press-in positions. By developing special setting heads for processing of the different pierce nuts, the customer's requirements were fulfilled.

Components

TOX®-Press fitting machines EMB 008 + EMB 015

TOX®-Powerpackage X-K 008

TOX®-Powerpackage X-K 015

Project Facts:

Press force: max. 80 kN/150 kN (8.16 tons/ 15.30 tons)
Sheet metal thicknesses: 2,5 mm / 3.0 mm / 5.0 mm
Setting heads with special geometries and integrated pneumatical slug remover
Feeding of the elements into the setting head in correct position including buffer line
Integrated sensors for checking the female threads of the functional elements

Have a similar project? Get a quote today!

Proyectos de referencia

Pierce Nut Press Fitting for Automotive Application

Information on the project

Components

Project Facts:

Categories

Dirección